PMP User Guide v5.5

PMP maintenance 44
PMP maintenance
This chapter describes routine maintenance tasks involved with PMP. The following topics are discussed:
• License Administration Access Levels
• Monitoring Administration
• Manual Log Purge
• Setting Performance Threshold values
License administration access levels
The Monitoring Administration, Manual Log Purge and Set Performance Threshold pages display information
according to the Users and Authorization settings, which are set within Systems Insight Manager. To configure
Systems Insight Manager Users and Authorization settings, refer to the HP Systems Insight Manager Installation and
Configuration Guide.
Table 1 displays the various Users and Authorization levels assigned by Systems Insight Manager and the access
rights at the Monitoring Administration, Manual Log Purge and Set Performance Threshold pages for each level.
Table 1 Users and authorization levels and rights
Level Access rights
Administrator Complete access to PMP Monitoring Administration, Manual Log Purge and Set Performance Threshold
functions
Operator Access to PMP Monitoring Administration and Set Performance Threshold functions
User No access to PMP Monitoring Administration, Manual Log Purge or Set Performance Threshold
functions
Anonymous No access to PMP Monitoring Administration or Manual Log Purge functions
If the Unknown Performance status, Error Performance status, Monitoring Administration, Manual Log Purge or Set
Performance Threshold pages are left unattended and idle for 15 minutes or more, the browser session expires and
the current user level is set to Anonymous as a security precaution.
To reactivate the appropriate current user access-level rights after a session has expired:
1. Close the Unknown Performance status, Error Performance status, Monitoring Administration, Set Performance
Threshold functions or Manual Log Purge page.
2. Relaunch the page by selecting Options>Performance Management Pack Options from the Systems
Insight Manager toolbar or clicking the appropriate icon in the PF column.