Management Agents Events Reference

Event DescriptionEvent SeverityEvent ID
Memory ECC normal write/read test failed. Probable Cause: The DIMM that maps
to cache line 0 is in a chipspare condition. Recommended Action: Contact HP support
SNMP Trap: hpevtMemCacheLine0WrRdFailed - 5161 in HPIFPTRAP.MIB.Warning5161
DIMM loading order error: DIMM deallocated. Probable Cause: A required DIMM
is not loaded in order to allow for proper operation of the DIMM specified in the
physical location. Recommended Action: Refer to the user's manual for Memory
loading instructions. SNMP Trap: hpevtMemDimmLoadOrderErr - 5171 in
HPIFPTRAP.MIB.Warning5171
DIMM SPD checksum failed. Probable Cause: The DIMMs SPD EEPROM got
corrupted. Recommended Action: Contact HP Support personnel to troubleshoot
the problem SNMP Trap: hpevtMemDimmSpdChecksum - 5172 in HPIFPTRAP.MIB.Warning5172
DIMM SPD fatal error. Probable Cause: Detection of SPD error type - various types.
Recommended Action: Reseat or replace the DIMM. If problem persists, contact HP
Support personnel to troubleshoot the problem SNMP Trap: hpevtMemDimmSpdFatal
- 5173 in HPIFPTRAP.MIB.Warning5173
Unsupported memory DIMM type. Probable Cause: A DIMM with an invalid DIMM
type was found. Recommended Action: Contact HP Support personnel to troubleshoot
the problem SNMP Trap: hpevtMemDimmTypeIncompatible - 5174 in
HPIFPTRAP.MIB.Warning5174
The DIMM type of this DIMM doesn't match with others in the DIMM group. Probable
Cause: The DIMMs in the rank do not have the same DIMM type. Recommended
Action: Contact HP Support personnel to troubleshoot the problem SNMP Trap:
hpevtMemDimmTypeMismatch - 5175 in HPIFPTRAP.MIB.Warning5175
The DIMM type table is full. New DIMM type cannot be added. Probable Cause: Too
many different types of DIMMs in system. Recommended Action: Reduce the number
of different types of DIMMs in the system. SNMP Trap:
hpevtMemDimmTypeTableFull - 5176 in HPIFPTRAP.MIB.Warning5176
DIMM number not found in DMT Table. Probable Cause: Probable internal FW error.
Recommended Action: Reload System Firmware. Recommended Action: Contact
HP Support personnel to troubleshoot the problem SNMP Trap:
hpevtMemDmtEntryNotFound - 5179 in HPIFPTRAP.MIB.Warning5179
Memory ECC multiple-bit data error detection failed. Probable Cause: The CEC failed
MBE detection. Recommended Action: Contact HP support personnel to troubleshoot
the problem SNMP Trap: hpevtMemEccMbeDataTstFailed - 5180 in HPIFPTRAP.MIB.Warning5180
Memory ECC multiple-bit ECC error signalling failed. Probable Cause: The CEC
failed MBE detection. Recommended Action: Contact HP support personnel to
troubleshoot the problem SNMP Trap: hpevtMemEccMbeSignalTstFailed - 5181 in
HPIFPTRAP.MIB.Warning5181
Memory ECC single-bit data error detection failed. Probable Cause: The CEC failed
SBE detection. Recommended Action: Contact HP support personnel to troubleshoot
the problem SNMP Trap: hpevtMemEccSbeDataTstFailed - 5182 in HPIFPTRAP.MIB.Warning5182
Memory ECC single-bit ECC error detection failed. Probable Cause: The CEC failed
SBE detection. Recommended Action: Contact HP support personnel to troubleshoot
the problem SNMP Trap: hpevtMemEccSbeEccTstFailed - 5183 in HPIFPTRAP.MIB.Warning5183
Insufficient memory for operation. Probable Cause: FW detected memory errors
below 1MB. Recommended Action: No action is needed if FW recovers. If system
will not boot, contact HP support to troubleshoot the problem. SNMP Trap:
hpevtMemEnoughMemFailed - 5185 in HPIFPTRAP.MIB.Warning5185
Memory address not found in MBAT. Probable Cause: The address logged in the
CEC doesn't map to a memory rank, possibly due to a SFW error or NVM corruption.
Recommended Action: Contact HP support to troubleshoot the problem. SNMP Trap:
hpevtMemErrAddrNotInMbat - 5186 in HPIFPTRAP.MIB.Warning5186
Platform Agent Events 19