Management Agents Events Reference

Event DescriptionEvent
Severity
Event ID
The Storage Agents service could not start agent "%1". The data contains the error
code.
Warning267
The Storage Agents service detected an invalid state for agent "%1". The data contains
the state.
Warning268
The Storage Agents service could not stop agent "%1". The data contains the error
code.
Warning269
The Storage Agents service could not terminate agent "%1". The data contains the
error code.
Warning270
The Storage Agents service could not unload the module "%1". The data contains the
error code.
Warning271
The Storage Agents service could not create the registry key "%1". The data contains
the error code.
Warning272
The Storage Agents service could not write the registry value "%1". The data contains
the error code.
Warning273
The Storage Agents service encountered a fatal error. The service is terminating. The
data contains the error code.
Error399
The Storage Agents service version %1 has started.Informational400
Error: The SNMP Agent is unable to genereate traps due to an error during
initialization. Cause: Check to ensure that the SNMP service is running. Reinstalling
the agents may fix this error.
Warning1792
Error: The SNMP Agent is older than other components. Cause: The SNMP Agent
is older than the other components of the Storage Agents. Reinstall the entire Storage
Agents package to correct this error.
Warning1795
Error: The %1 Agent is older than other components. Cause: The %1 Agent is older
than the other components of the Storage Agents. Reinstall the entire Storage Agents
package to correct this error.
Warning1796
Error: Unable to read security configuration information. SNMP sets have been
disabled. Cause: This can be cause by an invalid or missing configuration or by a
corrupt registry. Reinstalling the Storage Agents may correct this problem.
Warning1800
Error: Unable to load a required library. Cause: This error can be caused by a corrupt
or missing file. Reinstalling the Storage Agents or running the Emergency Repair
procedure may correct this error.
Warning1803
Error: The Storage Agent service is not running. Cause: The SNMP Agent has
determined that the Storage Agent service is not running. Stop the SNMP service
and restart the Storage Agents service. If the error persists, reinstalling the Storage
Agents may correct this error.
Warning1806
Error: The agent could not deliver trap %1. Cause: The agent was unable to use
Asynchronous Management to deliver a trap. This can be caused by a failure in the
Remote Access Service or by a missing or invalid configuration. Use the HP Insight
Management Agents control panel to verify the Asynchronous Management
configuration settings. Use the Network control panel to verify the Remote Access
configuration. If this error persists, reinstalling the Storage Agents or the Remote
Access Service may correct this error. For more information, refer to the Insight
Asynchronous Management documentation.
Informational1808
Storage System Fan Status Change.%nThe %6 %7 storage system connected to SCSI
bus %5 of the controller in slot %4 has a new status of %2.%n(Fan status values:
1=other, 2=ok, 3=failed, 4=notInstalled, 5=degraded)%n [SNMP TRAP: 8008 in
CPQSTSYS.MIB]
Warning1075
Storage System Temperature Failure.%nThe %6 %7 storage system connected to SCSI
bus %5 of the controller in slot %4 has a failed temperature status. Shutdown the
storage system as soon as possible.%n [SNMP TRAP: 8009 in CPQSTSYS.MIB]
Error1076
124 Management Agents Event Tables