Management Agents Events Reference

Event DescriptionEvent
Severity
Event ID
%1 Failed to initialize API: %2. %3 %1 - "[component name]" %2 - "EventApi" %3 -
"See log file for details."
Error107
%1 Failed to initialize API: %2. %3 %1 - "[component name]" %2 - "EventApi" %3 -
"See log file for details."
Error107
%1 An exception occurred: %2. %3 %1 - "[component name]" %2 - "error code = error
code" %3 - "See log file for details."
Warning108
%1 The %2 service was finished unexpectedly. %3 %1 - "[component name]" %2 -
"service name"
Error111
%1 An error occurred: %2. %3 %1 - "[component name]" %2 - "Error code = error
code" %3 - "See log file for details.
Warning112
%1 File access failure: %2. %3 %1 - "[component name]" %2 - "file name" %3 - "See
log file for details."
Error118
%1 IPMI initialization failure. %2 %1 - "[component name]" %2 - "See log file for
details."
Error120
%1 An IPMI communication error occurred: %2. %3 %1 - "[component name]" %2 -
"error code" %3 - "See log file for details.
Error121
%1 The MIB was opened and System Event Log information is now available through
SNMP interface. %1 - "[component name]"
Informational122
%1 Unable to listen to traps: %2. %3 %1 - "[component name]" %2 -
"SnmpMgrTrapListen failed" %3 - "See log file for details.
Warning124
%1 Watchdog timer error. %2 %1 - "[component name]" %2 - "See log file for details."Error127
%1 Error processing notified %2 event. %3 %1 - "[component name]" %2 - "FPL" %3
- "See log file for details."
Error129
%1 Error processing notified %2 event. %3 %1 - "[component name]" %2 - "SEL" %3
- "See log file for details."
Error129
Hpipmi (IPMI Driver) Events
Event DescriptionEvent
Severity
Event ID
During communication with the IPMI BMC device, the system detected that the BMC
entered an error state. The driver attempted to set the BMC state to a working state
but failed to do so. After 20 successive attempts, the driver has set the IPMI device
to a non working state. It is recommended that you seek assistance from
Hewlett-Packard. You can return the device instance to the working state by disabling
and enabling the IPMI device instance labeled Hewlett-Packard IPMI Device. You
can locate the IPMI device instance within the Device Manager user interface.
Error1000
A IPMI device was not recognized or detected, the IPMI device driver was not loaded.Error1001
The IPMI driver read a registry parameter that was invalid, the driver used a default
value for the registry parameter
HKLM\SYSTEM\CurrentControlSet\Control\IPMI\%2.
Warning1002
The IPMI device driver attempted to communicate with the IPMI BMC device during
device creation. However the communication failed due to a timeout. Either the
configured timeouts are too small and the IPMI BMC device responses take longer
than the timeouts or the BMC has a technical fault. You can increase the timeouts
associated with the IPMI device driver.
Error1003
110 Management Agents Event Tables