Installation (Smart Setup) Guide, Windows Server 2003, v6.2
About This Document
This document describes how to install and configure the operating system and HP software on
HP Integrity servers running Windows Server 2003.
The document printing date and part number indicate the document’s current edition. The
printing date changes when a new edition is printed. Minor changes may be made at reprint
without changing the printing date. The document part number changes when extensive changes
are made.
Document updates may be issued between editions to correct errors or document product changes.
To ensure that you receive the updated or new editions, you should subscribe to the appropriate
product support service. See your HP sales representative for details.
The latest version of this document can be found online at: http://docs.hp.com.
Intended Audience
This document is intended for system administrators and HP support personnel responsible for
installing, configuring, and managing HP Integrity servers. This document is not a tutorial.
New and Changed Information in This Edition
This document includes the following changes since its last release:
• removed all references to rx7620, rx8620, and Superdome sx1000 servers since they are no
longer supported (as of HP Insight Software Foundation Pack Version 6.2)
• changed “Integrity Essentials Foundation Pack” to “Insight Software Foundation Pack”
• removed all occurrences of “available on/applies to rx2660, rx3600, rx6600, BL860c, BL870c,
rx7640, rx8640, and Superdome sx/2000 servers only” since that is now the complete list of
supported servers, and not a partial list
• changed “Superdome/sx2000” to “Superdome sx2000”
• Chapter 1, removed section: “Task 5: Locate Your Microsoft Certificate of Authenticity (with
Product Key)”
• Chapter 1, removed “Factory-installed Windows Server 2003” option from section: “Task
1: Determine Current System Status”
• Chapter 2, removed section: “Enable Hyperthreading Using Partition Manager” (that
functionality was removed from System Management Homepage)
• Chapter 2, removed server support table from section: “Install from PXE”
• Chapter 2, removed section: “Enter the Product Key”
• Chapter 2, changed minimum recommended partition size from 33 GB to 64 GB in sections:
“Reinstall from a Headless Console” and “Reinstall from a GUI Console”
• Chapter 2, removed step for entering product activation key in section: “Load the System
Image to the Boot Disk”
• Chapter 2, changed “Enterprise” to “Datacenter” in Step 4, section: “Using Integrated Remote
Console to Install Windows”
• Chapter 2, added section “Downgrading from Windows Server 2008 to Windows Server
2003” to section: “Miscellaneous Installation Issues”
• Chapter 3 and Appendix D: added new WBEM Providers information
• Appendix A: added “HP AH402A or AH403A” and “HP AH400A or AH401A” to describe
Emulex and Qlogic adapters
• Appendix E: changed references from “A6869A” graphics USB card to “A6869B” because
“A” version is no longer supported
Intended Audience 9