Installation (Smart Setup) Guide, Windows Server 2003, v6.2

System
The System category displays the following information:
• Cooling and temperature
Provides information about the device environment, including thermal and fan status,
temperature sensor condition, sensor location, current temperature, temperature threshold,
type of threshold, and fan information.
• Memory
Provides information about memory modules, including index, location, description, HP
serial number, and HP part number.
• Power
Provides information about power supply groups, including location, presence, status,
redundancy state, used capacity, hot pluggable, model, maximum capacity, serial number,
voltage, firmware revision, and group redundancy.
• Processors
Provides processor details, including cabinet number, cell number, socket, number of cores,
threading status, processor type and speed, revision level, numeric coprocessor, cache
amount, maximum speed, serial number, part number, total available cache, and number
of active logical processors.
• FRU information
Provides information about Field Replaceable Units in the system, including index, name,
part number, vendor, type, serial number, class, slot number, chassis number, I/O chassis
number, and asset number.
• I/O chassis
Provides I/O chassis information, including power state and the identity of each device
installed in the PCI expansion slots.
System Configuration
The System Configuration category displays the following information:
• Automatic Server Recovery
Provides Automatic Server Recovery (ASR) configuration information and displays when
the server was last reset.
• Cell boards
Provides information about the cell board, including product name, ROM version, power,
number of CPUs in the cell, total cell memory, and CLM information.
• Partition Info
Provides information about the partition, including total number of active CPUs, number
of installed cells, number of powered on cells, number of ready for reconfigure cells, partition
name, root cell number, and total partition memory,
• System Summary
Provides general information that includes system model name, operating system, HP Insight
Agents version, system UUID, bay number, blade size, system firmware version, BMC
firmware version, management processor firmware version, HPVM firmware version,
management processor host name, lights-out management processor IP address, lights-out
management processor home page URL, crash dump information, and current and minimum
paging file size.
Also provides description information that includes system name, description, network
management up time, contact information, location, and IP address.
Specifies power management state.
Provides asset control information that includes device serial number and asset tag.
102 SMH and the WBEM Providers/SNMP Management Agents