HP Integrity Virtual Machines Installation, Configuration, and Administration

Save changes to NVRAM [Y-Yes N-No]: Y
6. Exit the EFI Boot Maintenance Management screen to return to the EFI Boot Manager screen.
Boot from the new boot entry, indicated by the virtual machine's MAC address:.
EFI Boot Maintenance Manager ver 1.10 [14.62]
Add a Boot Option. Select a Volume
Removable Media Boot [Acpi(PNP0604,0)]
Load File [Acpi(PNP0A03,0)/Pci(1|0)/Mac(763AE48F393F)]
Load File [EFI Shell [Built-in]]
Legacy Boot
Exit
The installation process continues just as if the virtual machine were an Integrity server.
When the basic installation process is complete, the software is copied from the distribution
media to the guest's disk. Then the operating sytem reboots. If this reboot fails, restart it, as
follows:
1. Enter the EFI shell by enter the co command at the virtual machine console prompt:
[compass1] vMP> CO
(Use Ctrl-B to return to vMP main menu.)
- - - - - - - - - - Prior Console Output - - - - - - - - - -
Shell>
2. Enter fs0:
Shell> fs0:
3. Enter hpux:
fs0\> hpux
The guest boots from fs0.
If you used a DVD to install the guest operating system, remove the virtual DVD, as follows:
1. Determine the bus, device, and target ID by entering the following command:
# hpvmstatus -P compass1
2. Delete the virtual DVD by entering the following command (substituting the correct PCI
bus, slot, and target number for 0,0,0):
# hpvmmodify -P compass1 -d dvd:scsi:0,0,0
3. If necessary, restart the guest to remove the DVD from the guest configuration.
4.2 Installing HP-UX Guest Management Software
After you install the HP-UX operating system on the virtual machine, install the Integrity VM
guest management software. The guest management software includes:
• Operating system patches to optimize virtual machine operation
• Integrity VM management tools, including hpvmcollect and hpvminfo
• The VM Provider, which allows you to use the VM Manager to manage the guest.
To install guest management software on an HP-UX guest, select the appropriate version of
HP-UX:
4.2 Installing HP-UX Guest Management Software 47