HP Integrity Virtual Machines Installation, Configuration, and Administration

A.7 Storage Interface Support
NotesVersion A.03.00Version A.02.00Versions A.01.00 and
A.01.20
Integrity VM
VM Host I/O is
HP-UX based.
Interfaces are
supported if they are
supported on the
version of HP-UX that
is running on the VM
Host.
• Fibre Channel
adapters
supported by the
TD or FCD driver
• SCSI adapters
supported by the
C8xx, MPT, or
CISS drivers
• IDE adapters
supported by the
SIDE driver
• USB support of the
UsbScsiAdapter
driver
• iSCSI adapters
supported by the
iSCSI driver
• SAS adapters
supported by the
SASD driver
• Fibre Channel
adapters
supported by the
TD or FCD driver
• SCSI adapters
supported by the
C8xx, MPT, or
CISS drivers
• IDE adapters
supported by the
SIDE driver
• USB support of the
UsbScsiAdapter
driver
• Fibre Channel
adapters
supported by the
TD or FCD driver
• SCSI adapters
supported by the
C8xx, MPT, or
CISS drivers
• IDE adapters
supported by the
SIDE driver
Storage Interfaces
A.7.1 Guest Attached Device Support
NotesVersion A.03.00Version A.02.00Version A.01.20Version A.01.00Integrity VM
• CD/DVD
burners
• Media
changers
• Tape devices
(For all types of
guest OS that
provide
supported drivers
for the VM Host
device.)
• CD/DVD
burners via
MMC-4
• Media
changers via
SMC-2
• Tape devices
via SSC-2
(For HP-UX
guests only.)
Not SupportedNot SupportedGuest Attached
Devices
A.7.2 Multipathing Software Support
NotesMultipathing Software
Supported with Integrity
VM A.0300
Multipathing Software
Supported with
Integrity VM A.02.00
Multipathing Software
Supported with Integrity
VM A.01.00 and A.01.20
Storage Device
• HP SecurePath A-A
/ A-P
• HP SecurePath
A-A / A-P
SecurePath A-PWhole Disk
Not Supported• EMC PowerPath
• HP SecurePath A-A / A-P
Disk Partition
• PVLinks
• EMC PowerPath
• HP SecurePath A-A / A-P
LVM Logical
Volume
164 Integrity VM Support Policy