HP Integrity Servers with Microsoft Windows Server 2003 Release Notes v6.2

Inaccurate VGA information displayed
Issue Version Control displays the VGA driver installed version and latest version
on HPVM guests, even though VGA is not supported. There is no VGA on
HPVM guests, however, the driver shows up in version control. The driver is
loaded when Windows incorrectly detects VGA and installs the driver. The
foundation agent passes the information to version control, and version control
displays the driver installed version, Support Pack version and latest version.
Servers HPVM guest
Workaround Ignore the message, there is no negative impact from the video driver. There is
currently no work around.
Video
Video not displayed
Issue After installing Windows Server 2003 or setting up the system for the first time,
there is no video display.
Servers All Integrity
Workaround Follow these steps:
1. Connect remotely to the system and open the device manager. See if the
display adapter has started without any problems.
2. If no problems are reported for the display monitor, verify all cables are
properly connected.
3. If you are using a KVM or LCD monitor, the resolution, refresh rate, or
both might be set too high for the monitor. Verify this is the problem by
connecting a CRT monitor. If the CRT monitor works, you must lower
either the resolution, refresh rate, or both to use the KVM or LCD monitor.
Check the monitor specifications for the maximum settings.
vKVM and vMedia
Tool bar fails to redraw as expected
Issue The vKVM window tool bar sometimes fails to redraw completely after other
windows have been open on the screen.
Servers rx6600, rx3600, rx2660
Workaround Move the mouse to the toolbar area, and the tool bar becomes visible.
vMedia drive not immediately accessible
Issue When using vMedia to connect client media (physical of ISO) to RUSA, there
might be a delay before that vMedia drive is accessible from File Explorer on
the RUSA system. This delay is typically a few minutes.
Servers rx6600, rx3600, rx2660
Workaround There is no workaround at this time.
vKVM session stops updating
Issue The vKVM session stops updating in the middle of a Windows install from the
Microsoft media when a monitor is connected to the VGA port of the server.
Servers rx6600, rx3600
34 Release 6.2 Overview