HP Integrity Servers with Microsoft Windows Server 2003 Release Notes v6.2

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&
prodNameId=415600&prodTypeId=12169&prodSeriesId=415598&swLang=13&swEnvOID=1060
LUNs undetected by ACU
Issue The ACU does not detect any LUNs attached to an AB379A or AB429A HBA
that has been swapped or added using the Online Add/Replace function while
the ACU was running.
Servers Superdome SX2000, rx8640, rx7640, rx6600, rx3600
Workaround Stopping and restarting the ACU corrects this issue. The ACU then sees the
LUNs attached to the AB379A or AB429A HBAs.
HBA removal fails
Issue When attempting to remove the AB379A or AB429A HBA using the Online
Replace functionality, a message appears:
The device ‘Qlogic Fibre Channel Adapter’ cannot be
stopped because a program is still accessing it.
Servers Superdome SX2000, rx8640, rx7640, rx6600, rx3600
Workaround 1. Stop the QLogic Management Suite Java Agent in the Services window
under Computer Management.
2. Stop the AB379A or AB429A using the Safely Remove Hardware function.
HPSUM hangs on MSA 1500 boot
Issue HP Smart Update Manager (HP-SUM) hangs when an MSA 1500 connected to
QLogic boots.
Servers All Integrity
Workaround This is an MSA firmware problem. Remove the hard drive from Bay 1 before
running HP-SUM.
Hard Disk Configuration
Disk configuration lost after reboot
Issue When configuring a boot LUN in EBSU Express Install using a direct connect
configuration to an MSA1000, the storage hard disk device configuration may
be lost after rebooting the system.
Servers All Integrity
Workaround The Emulex FC EFI driver (minimum rev. 3.11a4) has a Device Discovery delay
function. Go to Setup Utility > Configure Boot Parameters and change the
Delay Device Discovery parameter to 30.
HP c-Class Blade System Infrastructure
Onboard Administrator displays wrong CPU
Issue The Onboard Administrator displays wrong CPU information for the c-Class
enclosure where the HP Integrity BL860c or BL870c Server Blade resides. It
incorrectly reports that the CPU is Dual Core instead of Single Core.
Servers HP Integrity BL860c and BL870c Server Blades
Workaround There is no workaround for this problem.
Troubleshooting Common Issues 23