HP Integrity Servers with Microsoft Windows Server 2003 Release Notes v6.1

1. In Internet Explorer, click Tools > Internet Options.
2. Click the Connections tab.
3. Click LAN Settings.
4. Under Proxy Server, select the Bypass proxy server for local addresses
checkbox.
Another solution is to use https://127.0.0.1:2381 instead of
https://localhost:2381.
Program terminates after error message
Issue If SMH is frequently installed and then uninstalled, or if the SMH service is
frequently stopped and then started again, the following error can be written
to the Windows application event log:
Faulting application smhstart.exe, version 2.0.0.103,
faulting module unknown, version 0.0.0.0, fault address 0x00000000
Servers All Integrity
Workaround In most cases, SMH still works normally even after this message appears.
However, in rare cases when SMH terminates after this message, you should
uninstall SMH, remove the%Windisk%\hp\hpsmh folder, and reinstall SMH.
Version Control
Some HP Integrity servers marked as non-compliant by Microsoft System Management Server
Issue Microsoft System Management Server (SMS) might mark some HP Integrity
servers running Windows Server 2003 as non-compliant in software update
inventory because the software component “HP MP Serial Driver” is being
offered as an update. These models do not support this software component.
This problem occurs because the hpmpser.sys file is on these systems when
they are shipped from HP pre-installed with Windows Server 2003.
Servers Superdome, rx8640, rx7640, rx6600, rx3600, rx2660, HP Integrity BL860c Server
Blade, HP Integrity BL870c Server Blade
Workaround
Remove the c:\windows\system32\drivers\hpmpser.sysfile on these
systems.
Baseboard Management Controller IPMI device driver not displayed in VCA
Issue When using the Version Control Agent (VCA) to upgrade to the CD 6.0 Support
Pack on a server running Windows Server 2003 and with SSM 5.5 installed,
VCA does not provide the latest version of the Baseboard Management
Controller (BMC) IPMI device driver as an option to upgrade, even if the VCA
is configured to download the CD 6.0 Integrity Support Pack from VCRM.
Servers All Integrity
Workaround Either upgrade the entire Support Pack through VCA or upgrade the "HP
Integrity Insight Management Agents for Windows Server 2003/2008 on
Itanium-based systems " to the latest version; the BMC driver is upgraded
automatically
VCRM unsupported components
Issue VCRM does not support the following components:
• HP Integrity Gigabit NC370 Series driver for Windows Server 2003 on
Itanium-based systems
• Win/Linux 133MHz 10 GbE SR Fiber Adapter Driver
34 Release 6.1 Overview