HP Integrity Servers with Microsoft Windows Server 2003 Release Notes v6.1

Servers All Integrity
Workaround To install a device driver from the HP Smart Setup CD:
1. Download QFE 916860 from the Microsoft Web site.
2. Extract the ntkrnlmp.exe from the QFE package.
3. Rename the ntkrnlmp.exe file to ntkrnlmp.exe.org from Remote
installation image path.
4. Copy the new ntkrnlmp.exe to the same directory.
5. Click Start > Run, and enter cmd to open the command prompt.
6. At the command prompt, enter net stop binlsvc and net start
binlsvc to restart the RIS.
SCSI
Ultra 320 firmware update fails
Issue If a DVD-RW SCSI device with EBSU media is attached to an HP PCI-X Dual
Channel Ultra 320 SCSI card, the firmware update of this card fails.
Servers All Integrity
Workaround Copy the firmware to an EFI partition and flash the card from there.
Event log entry caused by timeout condition
Issue When running Microsoft Windows Server 2003 on an HP Integrity server with
an embedded U320 SCSI controller as the external disk drive controller,
intermittent Event ID 117 entries might be generated in the Windows Event
Log after rebooting.
Servers All Integrity
Workaround Ignore these events. They represent a timeout condition that does not cause any
system problems or data loss.
Smart Array
640x/530x generates errors in system event log
Issue Under extremely heavy I/O conditions the Smart Array 640x/530x driver
(cpqcissm) might generate Event ID 9 errors in the system event log.
Servers All Integrity
Workaround Ignore these events, as they do not cause any problems or loss of data. There is
no fix at this time.
6402 as internal disk drive controller generates errors
Issue When running the Smart Array 6402 as the internal disk drive controller,
intermittent Event ID 9 and Event ID 117 entries might be generated in the
Windows Event Log after a reboot.
Servers All Integrity
Workaround Ignore these events, as they do not cause any problems or loss of data. There is
no fix at this time.
StorageWorks 43xx enclosures might cause errors
Issue
StorageWorks 43xx enclosures in a dual bus configuration with an Ultra3 Dual
Bus I/O Module and a single power supply might report errors and fail the
logical volumes when attached to Smart Array Controllers. Port A of the
StorageWorks 44xx enclosure might intermittently report that all drives installed
30 Release 6.1 Overview