HP Integrity Servers with Microsoft Windows Server 2003 Release Notes v6.1

Workaround The Emulex FC EFI driver (minimum rev. 3.11a4) has a Device Discovery delay
function. Go to Setup Utility > Configure Boot Parameters and change the
Delay Device Discovery parameter to 30.
HP c-Class Blade System Infrastructure
Onboard Administrator displays wrong CPU
Issue The Onboard Administrator displays wrong CPU information for the c-Class
enclosure where the HP Integrity BL860c or BL870c Server Blade resides. It
incorrectly reports that the CPU is Dual Core instead of Single Core.
Servers HP Integrity BL860c and BL870c Server Blades
Workaround There is no workaround for this problem.
HP Smart Update Manager
Baseboard Management Controller IPMI device driver not displayed in HP-SUM
Issue When using HP-SUM to upgrade to the CD 6.0 Support Pack on a server running
Windows Server 2003 and with SSM 5.5 installed, the Baseboard Management
Controller (BMC) IPMI device driver version is displayed as NONE and HP-SUM
does not provide the option to upgrade.
Servers All Integrity
Workaround Either upgrade the entire Support Pack through VCA or upgrade the "HP
Integrity Insight Management Agents for Windows Server 2003/2008 on
Itanium-based systems " to the latest version; the BMC driver is upgraded
automatically
HPVM
Patches required on virtual machine guests
Issue Microsoft patches correct a compiler issue that can affect HPVM Windows
virtual machine guests. These issues can manifest in various ways, including
blue screens.
Servers All Integrity
Workaround Ensure that you install all Microsoft patches and Quick Fix Engineering updates
(QFEs) that are available on the current HP Smart Update media.
Installation
Attempting installation from a second DVD drive results in system message
Issue If you attempt to install a Smart component from the second DVD drive of a
system that contains multiple DVD drives, you are prompted to insert a DVD
into the first drive and the component is not installed. For example, consider a
system that has two DVD drives, the first of which is the D:\ drive and the
second is the E:\ drive. If you attempt to install a Smart component such as
Virus Throttle from the E:\ drive, the system assumes it is running from D:\
and issues a message about the missing DVD. This problem also occurs if your
system runs an iLO DVD drive as a second drive and if you use CD media.
Servers All Integrity
Workaround To avoid this issue, run the Smart components from first DVD drive.
Troubleshooting Common Issues 25