HP Integrity Servers with Microsoft Windows Server 2003 Release Notes v5.5

EBSU changes EFI Boot menu
Issue
If EBSU runs from vMedia, it changes the EFI Boot menu Internal Bootable
DVD to point to the vMedia device.
Servers sx2000, rx8640, rx7640, rx6600, rx3600, rx2660, HP Integrity BL860c Server Blade,
HP Integrity BL870c Server Blade
Workaround
Using the EFI Boot Manager, chose Boot Configuration and modify the Internal
Bootable DVD menu entry with the correct device path.
Foundation Agents
Memory leak generated by Foundation Agents
Issue If a hardware communication problem exists with the Baseboard Management
Controller (BMC), the Foundation Agents service (cqmghost.exe) might
continually increase its memory usage. The underlying Application
Programming Interface (API) requests memory and fails to deallocate it during
the BMC hardware error condition.
Servers All Integrity
Workaround When unacceptable memory usage is reached, reset the BMC using the MP user
interface or restart the Foundation Agent service. If this does not resolve the
issue, it might be necessary to contact hardware support. This issue will be
resolved in a future release of the HP Smart Setup CD.
Hard Disk Configuration
Disk configuration lost after reboot
Issue When configuring a boot LUN in EBSU Express Install using a direct connect
configuration to an MSA1000, the storage hard disk device configuration may
be lost after rebooting the system.
Servers All Integrity
Workaround The Emulex FC EFI driver (minimum rev. 3.11a4) has a Device Discovery delay
function. Go to Setup Utility > Configure Boot Parameters and change the
Delay Device Discovery parameter to 30.
HP c-Class Blade System Infrastructure
Onboard Administrator displays wrong CPU
Issue The Onboard Administrator displays wrong CPU information for the c-Class
enclosure where the HP Integrity BL860c or BL870c Server Blade resides. It
incorrectly reports that the CPU is Dual Core instead of Single Core.
Servers HP Integrity BL860c and BL870c Server Blades
Workaround There is no workaround for this problem.
BL870c SAS controller supports only one mirror
Issue The embedded SAS controller on the BL870c Server Blade can only support one
mirror. The mirror can be a two-drive mirror or a two-drive mirror with a hot
spare. Although there are four total drive bays available in the BL870c, you can
use only three of them (maximum) because of this limitation.
Servers HP Integrity BL870c Server Blade
Workaround There is no workaround for this problem.
26 Release 5.5 Overview