HP Integrity Servers Management Agents Overview v5.5

Threshold Support Allows a management application, such as HPSIM, to set
user-definable alarms on monitored items. For example,
system processor utilization or file system utilization.
Host Remote Alert Enables a sub-service that monitors some registry keys
updated by Cluster, Performance, and Host information
in order to verify and notify when thresholds are reached.
Clustering Information Enables a sub-service that captures information about a
configured cluster in the machine.
HP Insight Server Agents
HP Insight Server Agents comprise the following:
System configuration information Collects configuration information of server
hardware-related devices such as CPU, Memory, I/O,
cooling, power supply, and cabinets.
System Devices Status Provides dynamic status of monitored devices in the server
(for example, cooling devices, temperature sensors, and
power supplies) and of the watchdog timer used for
automatic server recovery.
Device Settings Enables you to set server device settings (for example, asset
tag, unit identification, and attention LED states) and
watchdog timer (automatic server recovery) parameters.
HP Insight NIC Agents
HP Insight NIC Agents supports all logical HP Network Interface Controllers (NICs) configured
on the system you are managing, including virtual NICs, team NICs, and single NICs. It also
collects Ethernet statistics.
HP Insight Storage Agents
HP Insight Storage Agents comprise the following:
Fibre Array information Enables a service that provides support for Fiber Channel
connected Storage Management.
NOTE: This service is not supported on HP Virtual
Machines (HPVM).
Drive Array information For a physical drive: Each physical drive is listed as a
separate entry in the Mass Storage submenu. The
information displayed next to the physical drive includes
the condition of the drive, the location of the drive (port and
drive number), and drive size.
For a logical drive: Each logical drive in the list displays the
condition, logical drive number, and the fault tolerance of
that logical drive.
NOTE: This service is not supported on HP Virtual
Machines (HPVM).
SCSI information Provides the module name, module version, and the date
the agent was created.
8 Introduction