AD380A and AD381A Installation Guide

2 Specifications and Regulatory Information
This chapter provides an overview of the AD380A and AD381A 2-Port GbE Ethernet cards and
lists their physical and environmental specifications.
Card Specifications
Adapter specs for the AD380A and AD381A are as follows:
Table 2-1 AD380A and AD381A card specifications
DescriptionSpecification
Intel® 82571EB Dual MAC/PHYNetwork Controller Chipset
x4 PCI Express v1.0aBus Type
Four laneBus Width
100 MHzClock Speed
96 KBOn-board Memory
Bus Master DMAData Transfer Method
YesBoot ROM Support
WOL, PXE 2.2, ACPI 1.1aManagement Capabilities
1280 mA @ 3.3 VDC maxPower Requirement
AD380A (copper): 10 Full/10 Half, 100 Full/100 Half, 1000 Full
AD381A (fiber): 1000 Full
Data Transmission Rate
IEEE 802.3, IEEE 802.3u, IEEE802.3ab, IEEE 802.3z, IEEE 802.3x (flow
control), IEEE 802.3ad (link aggregation), IEEE 802.1p (QoS), IEEE 802.1q
(VLAN tagging)
Standards Supported
12.95 cm x 6.86 cm [5.1 in x 2.7 in (L x W)] (without bracket)Dimensions
AD380A (copper):
10BASE-T: Category 3, 4, or 5 UTP, 100 M (328 ft)
100BASE-TX: CAT5 UTP, 100 M (328 ft)
1000BASE-TX: CAT5 UTP, 100 M (328 ft)
AD381A (fiber):
1000Base-SX: Multimode fiber (62.5 or 50 Micron)
Connectors and Distances
Automatically configuredInterrupts Supported
Operating: 0°C to 55°C (32°F to 131°F)
Storage: -30°C to 60°C (-22°F to 140°F)
Temperature Range
Operating: 20% to 75%
Storage: 20% to 80%
Relative Humidity (noncondensing)
UL Mark (US and Canada)
CE Mark
EN 60590
RoHS (European Union)
Safety Compliance
Card Specifications 19