A7298A HBA Installation Guide

Diagnostic and Configuration Utilities
69Host Bus Adapter for Windows and Linux Installation Guide
DOS Diagnostic Utility Main Menu
After the diagnostic and firmware download utility goes through its start-up
procedure, the Main menu displays and handles user requests. If the program
detects two or more HBAs in the system, you are prompted to choose which
HBAs is to be tested.
Table 9 lists the function of each option on the Main menu.
NOTE: Enter 0 in 'Option:' prompt to display previous menu
NOTE: All values entered are hexadecimal
LP6DUTIL Main Menu Revision x.x
1 - Test Host Adapters
2 - Modify Test Options
3 - Restart Host Adapters
4 - Input/Output
5 - Maintenance
6 - Show Host Adapters Info
7 - Quit
Option:
Table 10: DOS Diagnosis Utility Main Menu Selections
Menu Selection Description
1 – Test Host Adapters Runs host-based internal and external loopback tests.
2 – Modify Test Options Enables you to disable or enable up to seven different
tests, depending upon the cards installed (BIU-1 or
BIU-2). Specify number of retries and actions to take if
error occurs.
3 – Restart Host Adapters Resets the HBA.
4 – Input/Output Opens or closes input and output files.