Setup and Install

Clearing addresses
DSS uses address books to store e-mail addresses that a user types at the device. If user
authentication is enabled on the device, addresses are stored in a user's individual DSS address
book. Otherwise, the addresses are stored in a public DSS address book. DSS address books are
available to every digital sender or device that the DSS server supports. If the addresses contained in
these address books are no longer needed, they can be deleted by clicking Clear on the Addressing
tab in the Configuration Utility.
LDAP filters
When doing an LDAP search, users and groups will appear in the result found.
To be able to filter the LDAP search, follow these steps.
1. Open the Configuration Utility, and then click the Device Configuration tab
2. Click to select the device that you would like to filter. Click Configure Devices.
NOTE: If all the devices need this filter, configure one and then copy the configuration to the
other devices.
3. The Configure Devices dialog box appears. Click the Addressing subtab.
4. Click to select the Enable Network Contacts (use LDAP server) check box, and then click the
arrow next to LDAP Database Search Settings (Step 3).
Figure 3-45 The LDAP Database Search Settings section
5. In the LDAP Filter condition text box, type in the syntax to filter the LDAP search.
132 Chapter 3 Installation and configuration ENWW