Setup and Install

5. Select the fax notification options in the Notification group box.
●
Make a selection from the Condition on which to notify drop-down menu. The options are
Never, Always, or for errors on any faxes.
●
When notification is enabled, the Method used to deliver notification drop-down menu
becomes available. If authentication is enabled, the two options are Print and E-mail. If
authentication is not enabled, only the Print option is available, because DSS does not
have access to the user's e-mail address.
NOTE: Notification is not available for all fax delivery methods.
6. Select the quality of the fax by selecting a resolution from the Resolution drop-down list.
NOTE: The user cannot change the resolution setting from the device control panel.
7. Optionally, provide a Billing Code that can be used for accounting.
If the user needs to type or change the billing code, select the Allow users to edit billing code
check box. In addition, type in the minimum number of characters to use for a billing code value
in the Minimum Length text box.
8. Configure the Common Analog Fax settings:
●
Configure the Device Modem settings.
◦
Country/Region. Type the country/region in which the device is located.
◦
Company Name. Type the company name.
◦
Phone Number. Type the phone number to which the device internal modem is
connected.
◦
●
Configure the Fax Archive settings.
◦
Enable Fax Archiving
◦
Type of fax job to archive
◦
E-mail address
●
Configure the Fax Forwarding settings.
◦
Enable Fax Forwarding
◦
Type of fax job to forward
◦
Forwarding number
110 Chapter 3 Installation and configuration ENWW