Setup and Install

Table 3-24 Analog fax option — Fax subtab on the Configure Devices tab set — 2 of 2 (continued)
Callout Component Description
16 Default Receive
Notification
Settings
The Default Receive Notification Settings are a part of the Analog Fax
Receive settings. The e-mail address associated with a user's account is used
for notification when a user signs in at the device. If not signed in, the user must
enter an e-mail address before notification is sent. The device must also be set
up to use an SMTP server.
Use the following controls to configure the default receive notification settings
for the device.
● Condition on Which to Notify. Select from the drop-down menu.
●
Method Used to Deliver Notification. Select from the drop-down menu.
● Include Thumbnail. Click to include a thumbnail.
17 Fax Printing
Schedule
The Fax Printing Schedule is a part of the Analog Fax Receive settings. Use
the following controls to configure the default receive notification settings for the
device.
●
Always print faxes. Click to select.
● Always store faxes. Click to select.
●
Use Fax Printing Schedule. Click to select.
● Add. Click to add items to the fax printing schedule.
●
Edit. Click to edit items in the fax printing schedule.
●
Remove. Click to remove items from the fax printing schedule.
18 Blocked Fax List The Blocked Fax List is a part of the Analog Fax Receive settings. Click Add
to put a fax number on this list.
Configuring the analog fax feature on the device
1. On the DSS server, open the Configuration Utility and select a device from the list on the Device
Configuration tab.
2. Click Configure Device..., and then select the Fax tab.
3. Select the Enable Fax Send check box to enable the send-to-fax feature. If you want to enable
the device to receive faxes, click Enable Fax Receive.
4. Configure the following settings for using analog fax on the device.
●
Select the Fax Dialing settings from the Fax Dialing Volume, Dialing Mode, Redial
Interval, Redial on No Answer, and Redial on Busy drop-down menus.
●
Type in the Dialing Prefix and click to select the Detect Dial Tone check box if needed.
●
Click to select the Fax Number Confirmation, Enable PC Fax Send, and Enable JBIG
Compression check boxes if needed.
●
Select Error Correction and Fax Header settings from the drop-down menus.
ENWW
Configuration
109