Setup and Install

NOTE: If authentication is enabled, the Default From field is disabled. The e-mail address of
the authenticated user is used for the From e-mail address.
6. Type the Display Name (optional). This name appears in the From: text box when the device
user first initiates a send-to-e-mail operation. This text box can be used to provide instructions to
the device user (with messages such as "Please type your e-mail address here").
NOTE: If the display name is not provided, the default sender is the e-mail address that
appears in the From: text box.
7. Type a default e-mail subject into the Subject text box, if one is needed. This is used if the
device user does not type in their own e-mail subject.
8. Type in a message in the Default Message text box, if needed. The message appears in the
body of all e-mail messages that are sent from the device. Click to select the User Editable
check box to allow the user to edit the e-mail message.
9. Select Signing and Encryption options from the drop-down menus. Click to select the User
Editable check box to allow the user to change these options.
10. Select the default File Settings from the drop-down menus.
11. Click Apply to save changes.
To enable send to e-mail directly from the Device
1. On the Send to E-mail tab, select the Enable Send to E-mail check box.
2. Select directly from the device from the Send E-mails drop-down menu.
3. In the Device's SMTP Gateway text box, type the SMTP server TCP/IP address or hostname. If
you do not know the SMTP address, click Find Gateway to find it, and then click Test to verify
that it is a valid SMTP server.
NOTE: Some Device models only recognize TCP/IP addresses. In these cases, the hostname
is converted to the equivalent TCP/IP address.
4. Use the Maximum Attachment Size drop-down list to control the size of the attachments that
the e-mail server can accept. If an attachment exceeds the maximum size, it will be split
between two or more e-mails.
5. If authentication has not been enabled, complete the E-mail Address in the Default 'From'
Address group box. If the Device user does not provide a From e-mail address, this is the
return address that will be used. To prohibit users from changing the return e-mail address,
select the Prevent device user from changing the Default 'From:' Address check box. This
prevents a user from impersonating someone else.
NOTE: If authentication is enabled, the Default 'From' Address group box is disabled. The
e-mail address of the authenticated user is used for the From e-mail address.
6. Type the Display Name (optional). This name appears in the From: text box when the Device
user first initiates a send-to-e-mail operation. This text box can be used to provide instructions to
the Device user (with messages such as "Please type your e-mail address here").
ENWW
Configuration
95