Setup and Install

Figure 3-28 Send to E-mail subtab in the Configure Devices tab set
1
2
3
4
5
Table 3-20 Send to E-mail subtab — Configure Devices tab set
Callout Component Description
1 Enable Send to E-
mail
Click to select Enable Send to E-mail check box.
2 Outgoing E-mail
Server
Use the Outgoing E-mail (SMTP) Server section to manage the e-mail server for
the device. Select how the device sends e-mail from the Send E-mail drop-
down menu, then use the following controls to configure the e-mail server.
●
Add. Click to add a new e-mail server.
● Edit. Click to edit the settings for an e-mail server.
●
Remove. Click to remove an e-mail server from the list.
ENWW
Configuration
93