Administrator's Guide

Addressing subtab
Figure 3-22 Addressing subtab on the Device Configuration tab set
1
2
3
4
5
6
Table 3-15 Addressing subtab — Configure Devices tab set
Callout Component Description
1 Enable Network Contacts
(use LDAP server)
Click to select Enable Network Contacts (use LDAP server) check box,
and then follow the steps below.
2 Network Directory Server
(LDAP) (Step 1)
Use the following controls to designate the LDAP server.
● Type the hostname or IP address in the LDAP Server Address text
box or click AutoFind to have DSS find the LDAP server address.
● Click to select the Use a secure connection (SSL) check box.
●
Tye the port number in the Port text box.
3 Server Authentication
Requirements (Step 2)
Click to select one of the following options.
● Server does not require authentication.
● Server requires authentication.
60 Chapter 3 Installation and configuration ENWW