Mellanox MLNX-OS® User Manualfor SX1018HP Ethernet Managed Blade Switch

Rev 1.6.9
Mellanox Technologies
39
Mellanox Technologies Confidential
Step 3. Delete the old image that is listed under Images available to be installed prior to
fetching the new image. Use the command
image delete for this purpose.
Step 4. Fetch the new software image.
Step 5. Display the available images.
Partition 1:
SX_PPC_M460EX SX_3.3.3130 2013-03-20 21:32:25 ppc
Partition 2:
SX_PPC_M460EX SX_3.3.3130 2013-03-20 21:32:25 ppc
Images available to be installed:
image-PPC_M460EX-SX_3.3.3256.img
SX_PPC_M460EX SX_3.3.3256 2013-03-20 21:32:25 ppc
Serve image files via HTTP/HTTPS: no
No image install currently in progress.
Boot manager password is set.
No image install currently in progress.
Require trusted signature in image being installed: yes (default)
switch (config) #
switch (config) # image delete image-PPC_M460EX-SX_3.0.1224.img
switch (config) #
switch (config) # image fetch scp://username:password@192.168.10.125/var/www/html/
<image_name>
Password (if required): ******
100.0%[################################################## ###############]
switch (config) #
To recover from image corruption (e.g., due to power interruption), there are two
installed images on the system. See the commands:
image boot next
image boot location
.