Mellanox MLNX-OS User Manual for SX1018HP Ethernet Managed Blade Switch

Rev 2.10
Mellanox Technologies
399
Mellanox Technologies Confidential
module-type
module-type <type> [force]
Splits or un-splits the interface, as desired.
Syntax Description type qsfp - Port runs at 40000/56000Mbps.
qsfp-split-2 - Port is split and runs at 2X10000Mbps.
qsfp-split-4 - Port is split and runs at 4X10000Mbps.
force force the split operation without asking for user confir-
mation.
Default interface module type is qsfp (if the interface supports 40Gbps speed)
Configuration Mode Config interface ethernet
History 3.1.1400
Role admin
Example
switch (config interface ethernet 1/4) # module-type qsfp-split-4
the following interfaces will be unmapped: 1/4 1/1
Type 'yes' to confirm split: yes
switch (config interface ethernet 1/4) #
Related Commands switchport mode
switchport [trunk | hybrid] allowed-vlan
show vlan
Note
• The affected interfaces should be disabled prior to the operation
• in order to un-split the interface - used the command with “qsfp”, the speed is set to
40Gbps “module-type qsfp”.
• This command is applicable only on 40Gbps Ethernet ports