Reference Guide

HPMA Audit Message Reference

HP Medical Archive

system data flow, and when combined with storage audit messages, to

verify replica counts.

CBRE—Object Receive End

When transfer of a content block from one node to another is com-

pleted, this message is issued by the destination entity.

Table 11: CBRE—Object Receive End Fields

Code Field Description

CNID Connection

Identifier

The unique identifier of the node-to-node content block

transfer.

CBID Content Block

Identifier

The unique identifier of the content block being

transferred.

CTDR Transfer Direction Indicates if the CBID transfer was push-initiated or pull-

initiated:

PUSH—the transfer operation was requested by the

sending entity.

PULL—the transfer operation was requested by the

receiving entity.

CTSR Source Entity The node ID of the source (sender) of the CBID transfer.

CTDS Destination Entity The node ID of the destination (receiver) of the CBID

transfer.

CTSS Start Sequence

Count

Indicates the sequence count on which the transfer

started.

CTAS Actual End

Sequence Count

Indicates the last sequence count successfully trans-

ferred. If the Actual End Sequence Count is the same as

the Start Sequence Count, and the Transfer Result was

not successful, no data was exchanged.

RSLT Transfer Result The result of the transfer operation (from the perspective

of the sending entity):

SUCS—transfer successfully completed; all requested

sequence counts were sent.

CONL—connection lost during transfer

CTMO—connection timed-out during establishment

UNRE—destination node ID unreachable

CRPT—transfer ended due to reception of corrupt or

invalid data (may indicate tampering)