Reference Guide

HPMA Audit Message Reference

HP Medical Archive

Introduction

This chapter provides detailed descriptions of the attributes reported

in all audit messages issued by the system.

Messages are listed alphabetically to facilitate referencing the content

for a specific message of interest. To reference related messages for a

given class of activity, use the tables in the subsections below.

System Audit Messages

This group of messages are for events related to:

• The auditing system itself

• Grid node states

• Grid-wide task activity (Grid Tasks)

• Service backup operations

• File System Gateway (FSG) replications

Table 3: System Audit Messages

Code Description Page

ETCA TCP/IP Connection Establish—An incoming or outgoing TCP/IP

connection was successfully established.

ETCC TCP/IP Connection Close—An established connection has been

closed by either side of the connection (normally or abnormally).

ETCF TCP/IP Connection Fail—An outgoing connection attempt failed at

the lowest level, due to communication problems.

SADD Security Audit Disable—Audit message logging has been turned

off.

SADE Security Audit Enable—Audit message logging has been turned on. 57

ETAF Security Authentication Failed—A connection attempt using Trans-

port Layer Security (TLS) has failed.

SYSU Node Start—An HP Medical Archive grid service started; the nature

of the previous shutdown is indicated in the message.

SYSD Node Stop—An HP Medical Archive grid service has been grace-

fully stopped.