Addendum

Updated HP Media Center PC Information
5
Filename: s3adepc.doc Title: Self Cover [short version]
Template: HP-Print2K.dot Author: JimL Last Saved By: JimL
Revision #: 19 Page: 5 of 20 Printed: 12/12/02 10:22 AM
Connect speaker
channels (plugs) To PC back connector
Front speakers Audio (Line) Out (lime-green)
Rear speakers Audio (Line) In (blue)
Center/subwoofer
speakers
Mic-1 (pink)
3 Turn on the PC.
4 Turn on your speaker system.
5 Configure the multi-channel audio output;
refer to the next procedure.
To configure multi-channel audio output
for speakers configuration
1 Click Start on the taskbar.
2 Choose All Programs.
3 Choose Multi-channel Sound Manager,
and then click Multi-channel Sound
Manager again. The Audio Configuration
window opens.
Note:
If you do not see the Speaker Configuration tab,
your PC does not have the multi-channel option.
4 Click the Speaker Configuration tab. (Your
speakers must be connected to see this tab.)
5 Select the option describing the number
of speakers in your system, for example,
6 speaker mode (for 5.1 channels). You
can click the Speaker Test tab and then click on
a speaker to test it.
6 Click OK.
Understanding the
6-In-1 Memory Card Reader
The 6-In-1 memory card reader can read from
and write to six types of memory cards and to the
IBM Microdrive
™
disk drive.
Special note about the
Safely Remove Hardware utility
Warning:
Do not click Stop in the Safely
Remove Hardware
window while the USB
Mass Storage Device is selected. Doing so
removes the operating system recognition
of the 6-In-1 memory card reader from
your PC. You must restart the PC to use
your reader again.