McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Installation Guide (AA-RW1XC-TE, November 2006)

54 Factory configuration defaults
Factory zoning configuration
The Show Config Zoning command displays zoning configuration values.
Factory SNMP configuration
The Show Setup SNMP command displays SNMP configuration values.
Table 15 Factory zoning configuration
Parameter Default
InteropAutoSave True
DefaultZone
1
1. Available only when InteropMode is McDATA Fabric Mode.
False
Table 16 Factory SNMP configuration
Parameter Default
SNMPEnabled True
Contact <syscontact undefined>
Location <sysLocation undefined>
Description McDATA 4Gb SAN Switch
Trap [1-5] address Trap 1: 10.0.0.254; Traps 2–5: 0.0.0.0
Trap [1-5] port 162
Trap [1-5] severity Warning
Trap [1-5] version 2
Trap [1-5] enabled False
ObjectID 1.3.6.1.4.1.1663.1.1.1.1.37
AuthFailureTrap False
ProxyEnabled True