McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Installation Guide (AA-RW1XC-TE, November 2006)

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem installation guide 51
B Factory configuration defaults
This appendix describes the factory default configurations.
• Factory switch configuration, page 51
• Factory port configuration, page 52
• Factory port threshold alarm configuration, page 53
• Factory zoning configuration, page 54
• Factory SNMP configuration, page 54
• Factory RADIUS configuration, page 55
• Factory switch service configuration, page 55
• Factory system configuration, page 56
• Factory security configuration, page 56
Factory switch configuration
The Show Config Switch command displays switch configuration values.
Table 12 Factory switch configuration
Parameter Default
Admin state Online
Broadcast enabled True
InbandEnabled True
FDMIEnabled True
FDMIEntries 1000
DefaultDomain ID 97
Domain ID lock False
Symbolic name McDATA4GbSAN
R_A_TOV 10000
E_D_TOV 2000
Principal priority 254
Configuration description Default config
InteropMode Standard
239DomainSupport False