McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Installation Guide (AA-RW1XC-TE, November 2006)

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem installation guide 35
Installing Product Features Enablement keys
A PFE key is a password that you can purchase from your switch distributor or authorized reseller to enable
particular features in your switch. The following features are available with a PFE key:
• SANtegrity Enhanced: Enables device security on the switch.
• Element Manager: Enables the Element Manager switch management application through HAFM.
NOTE: To obtain the McDATA 4Gb SAN Switch serial number and PFE key, follow the step-by-step
instructions on the firmware feature entitlement request certificate for the PFE key. You can obtain a PFE key
from the web at w
ww.webkey.external.hp.com.
To install a PFE key:
1. Access the switch on which you want to install the PFE key using either McDATA Web Server or HAFM.
2. Select Switch > Features to open the Feature Licenses dialog shown in Figure 10.
Figure 10 Features Licenses dialog
3. Click Add in the Feature Licenses dialog to open the Add License Key dialog shown in Figure 11.
Figure 11 Add License Key dialog
4. Enter the license key in the Key field.
5. Click Get Description to display the PFE key description in the Description field.
6. Click Add Key. Allow a minute or two to complete.