McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Installation Guide (AA-RW1XA-TE, June 2005)

60 Factory configuration defaults
Factory system configuration
Enter the Show Setup System command to display system configuration values.
Factory security configuration
Enter the Show Config Security command to display security configuration values.
Table 19 Factory system configuration
Parameter Default
Ethernet network discovery Static
Ethernet network IP address 10.0.0.1
Ethernet network IP mask 255.0.0.0
Ethernet gateway address 10.0.0.254
Admin timeout 30 minutes
Inactivity timeout 0
LocalLogEnabled True
RemotelogEnabled False
RemoteLogHostAddress 10.0.0.254
NTPClientEnabled False
NTPServerAddress 10.0.0.254
EmbeddedGUIEnabled True
Table 20 Factory security configuration
Parameter Default
FabricBindingEnabled True
AutoSave True