McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Installation Guide (AA-RW1XA-TE, June 2005)

58 Factory configuration defaults
Factory zoning configuration
Enter the Show Config Zoning command to display zoning configuration values.
Factory SNMP configuration
Enter the Show Setup SNMP command to display SNMP configuration values.
Table 15 Factory zoning configuration
Parameter Default
InteropAutoSave True
DefaultVisibility All
DefaultZone False
DiscardInactive True
Table 16 Factory SNMP configuration
Parameter Default
SNMPEnabled True
Contact <syscontact undefined>
Location <sysLocation undefined>
Description McDATA 4Gb SAN Switch
Trap [1-5] address Trap 1: 10.0.0.254; Traps 2–5: 0.0.0.0
Trap [1-5] port 162
Trap [1-5] severity Warning
Trap [1-5] version 2
Trap [1-5] enabled False
ObjectID 1.3.6.1.4.1.1663.1.1.1.1.37
AuthFailureTrap False
ProxyEnabled True