McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Installation Guide (AA-RW1XA-TE, June 2005)

34 Installation
Installing Product Feature Enablement (PFE) keys
A Product Feature Enablement (PFE) key is a password that you can purchase from your switch distributor
or authorized reseller to enable particular features in your switch. The SANtegrity Enhanced PFE key
enables device security on the switch.
NOTE: To obtain the McDATA 4Gb SAN Switch serial number and Product Feature Enablement license
key, follow the step-by-step instructions on the "firmware feature entitlement request certificate" for the PFE
key. One of the license key retrieval options is via the web: www.webkey.external.hp.com.
To install a PFE key, perform the following procedure:
1. Add a fabric with the IP address of the switch on which to install the PFE key.
2. Open the faceplate display of the switch on which you want to install the PFE key.
3. Select Switch > Features to open the Feature Licenses dialog shown in Figure 10.
Figure 10 Features Licenses dialog
4. Click Add in the Feature Licenses dialog to open the Add License Key dialog shown in Figure 11.
Figure 11 Add License Key dialog
5. Enter the license key in the Key field in the Add License Key dialog.
6. Click Get Description to display the PFE key description in the Description field.
7. Click Add Key. Allow a minute or two to complete.