McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Command Line Interface Guide (AA-RWEJA-TE, November 2006)

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem command line interface guide 89
Filtering the event log display
You can customize what events are displayed according to the component or severity level. Enter the
Show Log Display command to filter the events in the display. You can choose from the following
severity levels and component events:
• Informative events
• Warning events
• Critical events
• E_Port events
• Management server events
• Name server events
• Port events
• Switch management events
• Simple Network Management Protocol (SNMP) events
• Zoning events
The following example filters the event log display for critical events:
McDATA4GbSAN #> show log display critical
See the ”Show Log command” on page 186.
Controlling messages in the output stream
Enter the Set Log Display command to specify which severity level filter to use to determine which
messages will be automatically displayed on the screen when events occur. Alarms are always included in
the output stream. The following example includes warning and critical level messages in the output stream:
McDATA4GbSAN (admin) #> set log display warn
See the ”Set Log command” on page 158.