McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Command Line Interface Guide (AA-RWEJA-TE, November 2006)

82
Add members to a group
Adding a member to a group involves specifying a group, the member WWN, and the member attributes.
The member attributes define the authentication method, encryption method, secrets, and fabric binding,
depending on the group type.
• For ISL Group member attributes, refer to Table 6.
• For Port Group member attributes, refer to Table 7.
• For MS Group member attributes, refer to Table 8.
Enter the Group Add command to add a member to a group:
McDATA4GbSAN (admin-security) #> group add Group_1
A list of attributes with formatting and default values will follow
Enter a new value or simply press the ENTER key to accept the current value
with exception of the Group Member WWN field which is mandatory.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Group Name Group_1
Group Type ISL
Member (WWN) [00:00:00:00:00:00:00:00]10:00:00:c0:dd:00:90:a3
Authentication (None / Chap) [None ]chap
PrimaryHash (MD5 / SHA-1) [MD5 ]
PrimarySecret (32 hex or 16 ASCII char value) [ ]0123456789abcdef
SecondaryHash (MD5 / SHA-1 / None) [None ]
SecondarySecret (40 hex or 20 ASCII char value) [ ]
Binding (domain ID 97-127, 0=None) [0 ]
Finished configuring attributes.
To discard this configuration use the security cancel command.
Modify a group member
Modifying a group member involves changing the member attributes. The member attributes define the
authentication method, encryption methods, secrets, and fabric binding, depending on the group type.
• For ISL member attributes, refer to Table 6.
• For Port member attributes, refer to Table 7.
• For MS member attributes, refer to Table 8.
Enter the Group Edit command to change the attributes of a group member:
McDATA4GbSAN (admin-security) #> group edit G1 10:00:00:c0:dd:00:90:a3
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current
value. If you wish to terminate this process before reaching the end of
the list press 'q' or 'Q' and the ENTER key to do so.
Group Name g1
Group Type ISL
Group Member 10:00:00:c0:dd:00:90:a3
Authentication (None / Chap) [None] chap
PrimaryHash (MD5 / SHA-1) [MD5 ] sha-1
PrimarySecret (40 hex or 20 ASCII char value) [ ] 1234567890123456789
SecondaryHash (MD5 / SHA-1 / None) [None] md5
SecondarySecret (32 hex or 16 ASCII char value) [ ] 1234567890123456
Binding (domain ID 97-127, 0=None) [3 ]
Finished configuring attributes.
To discard this configuration use the security cancel command.