McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Command Line Interface Guide (AA-RWEJA-TE, November 2006)

80
Managing security sets
Managing security sets consists of the following tasks:
• Create a security set, page 80
• Delete a security set, page 80
• Rename a security set, page 80
• Copy a security set, page 80
• Add groups to a security set, page 80
• Remove groups from a security set, page 80
• Activate a security set, page 80
• Deactivate a security set, page 80
All of these tasks except ”Activate a security set” and ”Deactivate a security set” require a Security
Edit session. See the ”Securityset command” on page 142.
Create a security set
Enter the Securityset Create command to create a security set as shown in the following example:
McDATA4GbSAN (admin-security) #> securityset create securityset_1
Delete a security set
Enter the Securityset Delete command to delete a security set as shown in the following example:
McDATA4GbSAN (admin-security) #> securityset delete securityset_1
Rename a security set
Enter the Securityset Rename command to rename a security set as shown in the following example:
McDATA4GbSAN (admin-security) #> securityset rename securityset_old securityset_new
Copy a security set
Enter the Securityset Copy command to copy a security set and its contents to a new security set as
shown in the following example:
McDATA4GbSAN (admin-security) #> securityset copy securityset_1 securityset_2
Add groups to a security set
Enter the Securityset Add command to add a group to a security set as shown in the following
example:
McDATA4GbSAN (admin-security) #> securityset add securityset_1 group_isl group_port
Remove groups from a security set
Enter the Securityset Remove command to remove groups from a security set as shown in the
following example:
McDATA4GbSAN (admin-security) #> sescurityset remove securityset_1 group_isl
group_port
Activate a security set
Enter the Securityset Activate command to apply security to the fabric as shown in the following
example:
McDATA4GbSAN (admin) #> securityset activate securityset_1
Deactivate a security set
Enter the Securityset Deactivate command to deactivate the active security set and disable security
in the fabric:
McDATA4GbSAN (admin) #> securityset deactivate