McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Command Line Interface Guide (AA-RWEJA-TE, November 2006)

76
Security set membership information
The Securityset Groups and Group Securitysets commands display security set membership
information. Enter the Securityset Groups command to display the member groups for a specified
security set as shown in the following example:
McDATA4GbSAN #> securityset groups alpha
Current list of Groups for SecuritySet: alpha
---------------------------------------
group1 (ISL)
group2 (Port)
Enter the Group Securitysets command to display the security sets for which a specified group is a
member as shown in the following example:
McDATA4GbSAN #> group securitysets group_1
Current list of SecuritySets for Group: group_1
---------------------------------------
SecuritySet_1
SecuritySet_2
SecuritySet_A
SecuritySet_B
See the ”Securityset command” on page 142.
Group membership information
Enter the Group Members command to display the members for a specified group as shown in the
following example:
McDATA4GbSAN #> group members group1
Current list of members for Group: group1
----------------------------------
10:00:00:c0:dd:00:71:ed
10:00:00:c0:dd:00:72:45
10:00:00:c0:dd:00:90:ef
10:00:00:c0:dd:00:b8:b7
See the ”Group command” on page 113.