McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Command Line Interface Guide (AA-RWEJA-TE, November 2006)

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem command line interface guide 71
Displaying SSL and SSH services
Enter the Show Setup Services command to display the status of the SSH and SSL services as shown
in the following example:
McDATA4GbSAN #> show setup services
System Services
-----------------------------
TelnetEnabled True
SSHEnabled False
GUIMgmtEnabled True
SSLMgmtEnabled False
EmbeddedGUIEnabled True
SNMPEnabled True
NTPEnabled True
CIMEnabled True
FTPEnabled True
MgmtServerEnabled True
See the ”Show Setup Services command” on page 204.
Creating an SSL security certificate
Enabling SSL automatically creates a security certificate on the switch. The security certificate is required to
establish an SSL connection with a management application such as McDATA Web Server. The certificate
is valid 24 hours before the certificate creation date and expires one year after the creation date. Should
the original certificate become invalid, enter the Create Certificate command within an Admin
session to create a new one as shown in the following example:
McDATA4GbSAN (admin) #> create certificate
The current date and time is day mon date hh:mm:ss UTC yyyy.
This is the time used to stamp onto the certificate.
Is the date and time correct? (y/n): [n] y
Certificate generation successful.
To ensure the creation of a valid certificate, be sure that the switch and the workstation time and date are
the same. Refer to ”Setting the date and time” on page 40.
See the ”Create command” on page 103.