McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Command Line Interface Guide (AA-RWEJA-TE, November 2006)

66
Activate a zone set
Enter the Zoneset Activate command to apply zoning to the fabric as shown in the following
example:
McDATA4GbSAN #> admin start
McDATA4GbSAN (admin) #> zoneset activate zoneset_1
Deactivate a zone set
Enter the Zoneset Deactivate command to deactivate the active zone set and disable zoning in the
fabric:
McDATA4GbSAN #> admin start
McDATA4GbSAN (admin) #> zoneset deactivate