McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Command Line Interface Guide (AA-RWEJA-TE, November 2006)

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem command line interface guide 61
Enter the Zone Zonesets command to display the zone sets for which a specified zone is a member as
shown in the following example:
McDATA4GbSAN #> zone zonesets zone1
Current List of ZoneSets for Zone: zone1
----------------------------------
zone_set_1
See the ”Zone command” on page 223.
Zone membership information
Enter the Zone Members command to display the members for a specified zone as shown in the
following example:
McDATA4GbSAN #> zone members wwn_b0241f
Current List of Members for Zone: wwn_b0241f
---------------------------------
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
21:00:00:e0:8b:02:41:2f
See the ”Zone command” on page 223.
Zoning modification history
Enter the Zoning History command to display a record of zoning modifications as shown in the
following example:
McDATA4GbSAN #> zoning history
Active Database Information
---------------------------
ZoneSetLastActivated/DeactivatedBy Remote
ZoneSetLastActivated/DeactivatedOn day mon date hh:mm:ss yyyy
Database Checksum 00000000
Inactive Database Information
-----------------------------
ConfigurationLastEditedBy admin@OB-session17
ConfigurationLastEditedOn day mon date hh:mm:ss yyyy
Database Checksum 00000000
History information includes the following:
• Time of the most recent zone set activation or deactivation and the user account that performed it
• Time of the most recent modifications to the zoning database and the user account that made them.
• Checksum for the zoning database
See the ”Zoning command” on page 228.