McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Command Line Interface Guide (AA-RWEJA-TE, November 2006)

Managing switch feature upgrades

Additional features are available to upgrade your switch through the purchase of a Product Feature

Enablement (PFE) key, which is a password you can purchase from your switch distributor or authorized

reseller. The following features are available with a PFE key:

• The SANtegrity Enhanced® PFE key enables device security on the switch. Device security commands

include the following:

• Group command

• Security command

• Securityset command

• Set Config Security command

• The Element Manger PFE key enables Element Manager to allow management of the McDATA 4Gb

SAN Switch using the High Availability Fabric Manager (HAFM) or the Enterprise Fabric Connectivity

Manager (EFCM) application.

To obtain the McDATA 4Gb SAN Switch serial number and Product Feature Enablement license key, follow

the step-by-step instructions on the firmware feature entitlement request certificate for the PFE key. You can

obtain a PFE key at: www.webkey.external.hp.com

. If the PFE key instructions indicate that the procedure is

disruptive, isolate the switch from the fabric before installing the PFE key.

Displaying feature licenses

Enter the Feature Log command to display the license keys that are installed on your switch as shown in

the following example:

McDATA4GbSAN #> feature log

Mfg Feature Log:

----------------

Switch Licensed for McDATA Fabric Mode

Customer Feature Log:

---------------------

1) Thu Jul 20 14:00:26 2006 - Switch Licensed for SANtegrity capability

1A0-LCUKCOF1H3H3G

2) Thu Jul 20 14:00:26 2006 - Switch Licensed for EFCM capability

1A0-LCUKCOF1H3H3G

See the ”Feature command” on page 110.