McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Command Line Interface Guide (AA-RWEJA-TE, November 2006)

Hardware information

Enter the Show Chassis command to display the status of the switch hardware including fans, power

supplies, internal temperature, and Heartbeat LED status.

The following is an example of the Show Chassis command:

McDATA4GbSAN #> show chassis

Chassis Information

-------------------

BoardTemp (1) - Degrees Celsius 31

PowerSupplyStatus (1) Good

HeartBeatCode 1

HeartBeatStatus Normal

The HeartBeatCode and HeartBeatStatus entries indicate the power-on self test (POST) results

revealed by the Heartbeat LED blink patterns. The result is normal operation or a blink pattern indicating a

critical error as described in Table 4. Refer to the McDATA 4Gb SAN Switch for HP p-Class BladeSystem

installation guide for more information about the Heartbeat LED and its blink patterns.

See the ”Show Chassis command” on page 176.

Firmware information

Enter the Show Version command to display a summary of switch identity information, including the

firmware version. The following is an example of the Show Version command:

McDATA4GbSAN #> show version

*****************************************************

* *

* Command Line Interface SHell (CLISH) *

* *

*****************************************************

SystemDescription McDATA 4Gb SAN Switch

EthNetworkAddress 10.20.94.50 (use 'set setup system' to update)

MACAddress 00:c0:dd:07:12:1b

WorldWideName 10:00:08:00:88:e0:aa:b5

ChassisSerialNumber 0508a00172

SymbolicName McDATA4GbSAN

ActiveSWVersion V6.4.x.x.x

ActiveTimestamp ddd mmm nn hh:mm:ss yyyy

DiagnosticsStatus Passed

ISLLicensedPorts All

See the ”Show Version command” on page 213.

Table 4 Heartbeat LED activity

HeartBeatCode—HeartBeatStatus Description

1—Normal One blink per second—Normal operation

2—AppDied Two blink cluster—Internal firmware failure

3—PostFailed Three blink cluster—System error

4—CorruptFilesystem Four blink cluster—Configuration file system error

5—Overheating Five blink cluster—Over temperature