McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Command Line Interface Guide (AA-RWEJA-TE, November 2006)

30
Configuration information
The Show Config command displays a variety of configuration information at the port and switch levels.
In addition to the basic switch configurations, the Show Config command displays parameters that
control how data is maintained in the security and zoning databases. The Show Config command
displays the following types of information:
• Switch configuration parameters, page 30
• Zoning configuration parameters, page 30
• Security configuration parameters, page 31
See ”Displaying port information” on page 47 for details about displaying port configuration information.
Switch configuration parameters
Enter the Show Config Switch command to display the switch configuration parameters. These
parameters determine the operational characteristics of the switch. See Table 23 for a description these
parameters.
McDATA4GbSAN #> show config switch
Configuration Name: default
-------------------
AdminState Online
BroadcastEnabled True
InbandEnabled True
FdmiEnabled True
FdmiEntries 1000
DefaultDomainID 98 (0x62)
DomainIDLock False
SymbolicName McDATA4GbSAN
R_A_TOV 10000
E_D_TOV 2000
PrincipalPriority 254
ConfigDescription Default Config
ConfigLastSavedBy Initial
ConfigLastSavedOn Initial
InteropMode Standard
239DomainSupport False
See the ”Show Config Switch command” on page 179.
Zoning configuration parameters
Enter the Show Config Zoning command to display zoning configuration parameters. These
parameters determine how zoning is applied to the switch. See Table 25 for a description of these
parameters.
McDATA4GbSAN #> show config zoning
Configuration Name: default
-------------------
Zoning Configuration Information
--------------------------------
InteropAutoSave True
DefaultZone False
See the ”Show Config Zoning command” on page 181.