McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Command Line Interface Guide (AA-RWEJA-TE, November 2006)

224
rename [zone_old] [zone_new]
Renames the zone given by [zone_old] to the zone given by [zone_new].
zonesets [zone]
Displays all zone sets of which the zone given by [zone] is a component. This operand does
not require an Admin session.
Examples The following is an example of the Zone List command:
McDATA4GbSAN #> zone list
Zone ZoneSet
-------------------
wwn_b0241f
zone_set_1
wwn_23bd31
zone_set_1
wwn_221416
zone_set_1
wwn_2215c3
zone_set_1
wwn_0160ed
zone_set_1
wwn_c001b0
zone_set_1
wwn_401248
zone_set_1
wwn_02402f
zone_set_1
wwn_22412f
zone_set_1
The following is an example of the Zone Members command:
McDATA4GbSAN #> zone members wwn_b0241f
Current List of Members for Zone: wwn_b0241f
---------------------------------
50:06:04:82:bf:d2:18:c2
50:06:04:82:bf:d2:18:d2
21:00:00:e0:8b:02:41:2f
The following is an example of the Zone Zonesets command:
McDATA4GbSAN #> zone zonesets zone1
Current List of ZoneSets for Zone: zone1
----------------------------------
zone_set_1