McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Command Line Interface Guide (AA-RWEJA-TE, November 2006)

198
Table 32 Port activity data
Entry Description
ALinit Number of arbitrated loop port initializations
ALinitError Number of times the port entered initialization and the initialization
failed
BadFrames Number of frames that have framing errors
BBCR_FrameFailures Number of times more frames were lost during a credit recovery period
than the recovery process could resolve. This causes a Link Reset to
recover the credits.
BBCR_RRDYFailures Number of Buffer-to-Buffer Credit Recovery (BBCR) Receiver Ready
(R_RDY) failures. This is the number of times more R_RDYs were lost
during a credit recovery period than the recovery process could resolve.
This causes a Link Reset to recover the credits.
ClassxFramesIn Number of class x frames received by this port
ClassxFramesOut Number of class x frames sent by this port
ClassxWordsIn Number of class x words received by this port
ClassxWordsOut Number of class x words sent by this port
ClassxToss Number of times a Start-of-Frame (SOFi3 or SOFn3) frame is tossed from
TBUF
DecodeErrors Number of decode errors detected
EpConnects Number of times an E_Port connected through ISL negotiation
FBusy Number of times the switch sent a fabric busy (F_BSY) because a Class 2
frame could not be delivered within ED_TOV time. Number of class 2
and class 3 F_BSY frames generated by this port in response to incoming
frames. This usually indicates a busy condition on the fabric or an N_Port
that is preventing delivery of a frame.
FlowErrors Number of frames received when there were no available credits
FReject Number of frames from devices that were rejected
InvalidCRC Invalid CRC detected
InvalidDestAddr Invalid destination address detected
LIP_AL_PD_AL_PS Number of Loop Inititialization Primitives (LIP) issued by the loop port to
reset the device port. The loop port is identified by the Arbitrary Loop
Physical Source Address (AL_PS). The NL_Port is identified by the
Arbitrary Loop Physical Destination Address (AL_PD).
LIP_F7_AL_PS Number of LIPs issued by the loop port to reinitialize the loop.
LIP_F7_F7 Number of LIPs issued by the loop port to acquire a valid AL_PA
LIP_F8_AL_PS Number of LIPs issued by the loop port, with a valid Arbitrary Loop
Physical Address (AL_PA), indicating a loop failure has been detected at
the receiver.
LIP_F8_F7 Number of LIPs issued by the loop port, without a valid AL_PA, indicating
that a failure has been detected at the receiver