McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Command Line Interface Guide (AA-RWEJA-TE, November 2006)

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem command line interface guide 197
Show Port command
Description Displays operational information for one or more ports.
Authority None
Syntax
show port [port_number]
Operands
[port_number]
The port for which to display operational information. External ports are numbered 0 and 9;
internal ports are numbered 1–8. If you omit [port_number], information for all ports is
displayed.
Notes Table 31 describes the port configuration parameters. Table 32 describes the port activity data.
Table 31 Port configuration parameters
Entry Description
AdminState Port administrative state (online, offline, diagnostics, or down)
AsicNumber ASIC number
AsicPort ASIC port number
ConfigType Configured port type
DiagStatus Status from the most recent POST
EpConnState Status of the E_Port connection
EpIsoReason Reason for E_Port isolation
IOStreamGuard I/O StreamGuard status
LinkSpeed Port transmission speed
LinkState Port activity status (active/inactive)
LoginStatus Login status (LoggedIn/NotLoggedIn)
MaxCredit Maximum number of port buffer credits
MediaSpeeds Possible transmission speeds
MediaPartNumber Transceiver vendor part number
MediaRevision Transceiver revision
MediaType Transceiver type
MediaVendor Transceiver manufacturer
MediaVendorID Transceiver manufacturer identifier
OperationalState Operational state (online/offline/diagnostics/down)
PerfTuningMode Automatic performance tuning status (True/False)
PortID Fibre Channel port address
PortWWN WWPN
RunningType Operational port type
SymbolicName Port symbolic name
SyncStatus Synchronization status (SyncAcquired/SyncLost)
XmitterEnabled Transmitter status (True/False)