McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Command Line Interface Guide (AA-RWEJA-TE, November 2006)

196
outframe [port_list]
Displays continuous performance data in frames/second transmitted given by [port_list].
[port_list] can be a set of port numbers and ranges delimited by spaces. For example,
0 2 7-9 specifies ports 0, 2, 7, 8, and 9. If you omit [port_list], the command displays
performance data for all ports. Press any key to stop the display.
errors [port_list]
Displays continuous error counts given by [port_list]. [port_list] can be a set of port
numbers and ranges delimited by spaces. For example, 0 2 7-9 specifies ports 0, 2, 7, 8, and
9. If you omit [port_list], the command displays performance data for all ports. Press any
key to stop the display.
Examples The following is an example of the Show Perf command:
McDATA4GbSAN #> show perf
Bytes/s Bytes/s Bytes/s Frames/s Frames/s Frames/s
Port (in) (out) (total) (in) (out) (total)
---- ------- ------- ------- -------- -------- --------
Ext:0 21M 0 21M 24K 0 24K
Ext:9 85K 20M 20M 108 12K 12K
Int:1 1K 4M 4M 32 2K 2K
Int:2 0 0 0 0 0 0
Int:3 1K 4M 4M 33 2K 2K
Int:4 0 0 0 0 0 0
Int:5 0 0 0 0 0 0
Int:6 278K 327K 605K 216 423 639
Int:7 0 0 0 0 0 0
Int:8 0 0 0 0 0 0
The following is an example of the Show Perf Byte command:
McDATA4GbSAN #> show perf byte
Displaying bytes/sec (total)... (Press any key to stop display)
0 9 1 2 3 4 5 6 7 8
-------------------------------------------------
30M 12M 43M 5M 0 4M 0 0 818K 0
17M 17M 35M 4M 0 4M 0 0 733K 0
20M 20M 40M 5M 0 5M 0 0 902K 0
45M 11M 56M 3M 0 4M 0 0 465K 0
20M 20M 41M 4M 0 4M 0 0 728K 0
19M 19M 39M 4M 0 5M 0 0 911K 0
45M 11M 56M 4M 0 4M 0 0 536K 0
20M 20M 41M 4M 0 3M 0 0 458K 0
19M 19M 38M 3M 0 3M 0 0 703K 0
45M 11M 56M 5M 0 5M 0 0 626K 0
21M 20M 41M 4M 0 4M 0 0 1M 0
20M 20M 40M 4M 0 4M 0 0 1M 0
44M 10M 55M 4M 0 4M 0 0 1M 0
21M 20M 41M 4M 0 4M 0 0 399K 0