McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Command Line Interface Guide (AA-RWEJA-TE, November 2006)

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem command line interface guide 191
HighWarning Vendor-specified threshold above which a warning is issued
LowWarning Vendor-specified threshold below which a warning is issued
LowAlarm Vendor-specified threshold below which an alarm is issued
Table 30 Transceiver Information (Continued)
Information Type Description
Examples The following is an example of the Show Media command for port 0:
McDATA4GbSAN #> show media 0
Port Number: 0
-------------
MediaType 400-M5-SN-I
MediaVendor FINISAR CORP.
MediaPartNumber FTRJ8524P2BNL
MediaRevision A
MediaSerialNumber P6G22RL
MediaSpeeds 1Gb/s, 2Gb/s, 4Gb/s
Temp Voltage Tx Bias Tx Pwr Rx Pwr
(C) (V) (mA) (mW) (mW)
----------- ----------- ------------ ----------- -----------
Value 37.32 3.33 7.30 0.373 0.000
Status Normal HighWarning Normal Normal LowAlarm
HighAlarm 95.00 3.90 17.00 0.637 1.264
HighWarning 90.00 3.70 14.00 0.637 0.791
LowWarning -20.00 2.90 2.00 0.082 0.028
LowAlarm -25.00 2.70 1.00 0.073 0.019
The following is an example of the Show Media command for all ports:
McDATA4GbSAN #> show media
Note: -- LowAlarm; - LowWarning; + HighWarning; ++ HighAlarm
Port Vendor Name Temp Voltage Tx Bias Tx Pwr Rx Pwr
Num (C) (V) (mA) (mW) (mW)
---- ----------- ------- ------- ------- ------ ------
0 NotInstalled N/A N/A N/A N/A N/A
9 FINISAR 37.32 3.33+ 7.30 0.371 0.000 --