McDATA® 4Gb SAN Switch for HP p-Class BladeSystem Command Line Interface Guide (AA-RWEJA-TE, November 2006)

McDATA® 4Gb SAN Switch for HP p-Class BladeSystem command line interface guide 165
Set Setup Services command
Description Configures services on the switch.
Authority Admin session
Syntax
set setup services
This command prompts you in a line-by-line fashion to enable or disable switch services. Table 27
describes the switch service parameters. For each parameter, enter a new value or press Enter to
accept the current value shown in brackets.
NOTE: Use caution when disabling TelnetEnabled and GUIMgmtEnabled; it is possible to
disable all Ethernet access to the switch.
Table 27 Switch services settings
Entry Description
TelnetEnabled Enables (True) or disables (False) the ability to manage the switch over
a Telnet connection. Disabling this service is not recommended. The
default is True.
SSHEnabled Enables (True) or disables (False) Secure Shell (SSH) connections to the
switch. SSH secures the remote connection to the switch. To establish a
secure remote connection, your workstation must use an SSH client.
The default is False.
GUIMgmtEnabled Enables (True) or disables (False) out-of-band management of the
switch with McDATA Web Server, API, SNMP, and CIM. If this service
is disabled, the switch can only be managed in-band. The default is
True.
SSLEnabled Enables (True) or disables (False) secure SSL connections for
management applications, including McDATA Web Server, Element
Manager, Application Programming Interface, and the CIM server.
The default is False.
• To enable secure SSL connections, you must first synchronize the
date and time on the switch and workstation.
• This service must be enabled to authenticate users through a
RADIUS server.
• Enabling SSL automatically creates a security certificate on the
switch.
• To disable SSL when using a user authentication RADIUS server,
the RADIUS server authentication order must be local.
EmbeddedGUIEnabled Enables (True) or disables (False) the McDATA Web Server and
Element Manager. This parameter is the master control for the Set
Setup System command parameter, EmbeddedGUIEnabled. The
default is True.
SNMPEnabled Enables (True) or disables (False) the management of the switch
through third-party applications that use SNMP. This parameter is the
master control for the Set Setup SNMP command parameter,
SNMPEnabled. The default is True.